Leica Captivate Technical Reference Manual page 808

46.4
46.4.1
Access
Description
46.4.2
Availability
Description
808
Value Description
Def pendu- Resulting horizontal displacement at defined chainage.
lum dis-
placement
Actual pen- Resulting horizontal displacement at current chainage.
dulum dis-
placement
Def pendu- Resulting pendulum angle at defined chainage.
lum angle
Actual pen- Resulting pendulum angle at current chainage.
dulum angle
The Toolbox
Overview
Press Fn Tools on any page of the Stake/Check panel.
Additional functions for staking/checking the track can be accessed through
the toolbox. This functionality is additional to those already existing functions
which are available via the function keys.
The functionality differs between the stake and check methods. Refer to these
subchapters for a detailed description of the functionalities:
• "46.4.2 Use heights from DTM"
"46.4.3 Apply current chainage"
•
"46.4.4 Stake individual point"
•
• "46.4.5 Second point of super-elevation"
"46.4.6 COGO Rail"
•
Use heights from DTM
This menu function is available for stake and check.
The app offers the possibility to
switch to a height which is retrieved from an existing height layer, as
•
defined in the selected DTM job. The layer from the DTM is applied and
used as a height reference for the staking out or checking of alignments.
• retrieve heights from an existing layer, as defined in the DTM job associ-
ated with the project. The DTM used is not considered for the stake values.
Three new information lines are added to the
DTM height and DTM layer.
show the DTM triangles in the planar view and in the cross section view in
•
3D viewer.
Once defined, each layer remains active until it is turned off. DTM heights can
be used for both 2D and 3D alignments.
page: DTM height diff,
Roads - Rail