Table of Contents
Advertisement
40.2
Access
Measure QuickGrid
Point
Matched Pts & Resid-
uals
558
Next step
OK accesses Measure QuickGrid Point.
Determining a New Coordinate System
Press OK in Define Local Quickgrid Pt.
This panel is similar to the standard Measure panel. Refer to "54.1.2 Real-Time
Rover Operations".
Next step
For Method: Multiple points: After measuring and storing a point,
•
Matched Pts & Residuals is accessed.
•
For Method: Orientate to line: Measure the points of the line. Then
Store Coordinate System is accessed.
•
For all other methods: After measuring and storing a point, Store Coordi-
nate System is accessed.
This panel shows what points have been matched so far. More points can be
added, matched points can be deleted.
Key
Description
OK
To confirm the selections, compute the transformation and
continue with the subsequent panel.
New
To survey another point and return to the Measure panel.
Match
To change the type of match for the highlighted point.
Remove
To delete the highlighted point from the list.
More
To display information about height residuals.
Description of metadata
Metadata
Description
-
The point ID of the points chosen from the job.
Match
The type of match to be made between the point and the
surveyed point. This information is used in the transforma-
tion calculation. Position and height, position only, height
only or none.
QuickGrid
Advertisement
Table of Contents
