Table of Contents
Advertisement
57.3
Access
Settings
Hidden Point on TS
Field
Option
Easting,
Display only
Northing
and Height
Next step
Page changes to the Code page. Type in a code if desired. In the 3D viewer,
solid arrows indicate measured distances.
Configuring Hidden Point
In Measure Reflector 1 press Fn Settings.
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
Edit
To configure the selected page. Refer to "26.2 User defined
pages".
Fn About
To display information about the program name, the version
number, the date of the version, the copyright and the arti-
cle number.
Description of fields
Field
Option
Page to
Selectable list
show
Measure-
Editable field
ment toler-
ance
Once hidden
Check box
point is
measured
delete the
rod points
Description
The calculated coordinates of the computed
hidden point. ----- is displayed for unavaila-
ble information.
Description
The user-defined page to be shown in Meas-
ure Reflector 1, Measure Reflector 2 and
Measure Reflector 3.
Limit of the difference between input and
measured spacing of the prisms.
☞
For three prisms being used, limit
for maximum deviation of the
three measurements.
The auxiliary points are deleted when the
hidden point is stored.
947
Advertisement
Table of Contents
