Table of Contents
Advertisement
Intersection Result,
Result page
COGO
Field
Option
Second TS
Selectable list
setup point
TS observa-
Selectable list
tion
Next step
Calculate calculates the result and accesses Intersection Result.
Key
Description
Store
To store the result.
Stake
To access the Stakeout app and stake out the calculated
COGO point.
Page
To change to another page on this panel.
FnCoord
To view other coordinate types.
Fn Ell Ht and
To change between the ellipsoidal and the orthometric
Fn Height
height. Available for local coordinates.
Fn Tools
Refer to "37 Apps - The Toolbox".
Description of fields
Field
Option
Point ID
Editable field
Computed
Display only
height
Easting and
Display only
Northing
Height
Editable field
Next step
On the Code page, type in a code if desired.
On the 3D viewer page, arrows point from the known points to the calculated
COGO point.
On the Checks page, values for check are displayed:
the difference between the height calculations from First TS setup point
•
and Second TS setup point
•
the horizontal distances from both setup points to the calculated point.
Store stores the result.
Description
The point ID of the second TS setup which is
the known start point of the second line for
the COGO calculation.
The point ID of the TS measurement which is
the known end point of the second line for
the COGO calculation.
Description
The identifier for the COGO point depending
on the point ID template configured for GS
points / TS points in ID Templates. The
point ID can be changed.
The height being used as defined on Set-
tings, TS specific page.
The calculated coordinates.
The height of the first point used in the
COGO calculation is suggested. A height
value to be stored with the calculated point
can be typed in.
493
Advertisement
Table of Contents
