Configuring Remote Point - Leica Captivate Technical Reference Manual

37.4.3
Access
Apps - The Toolbox
Key Description
Fn Indiv ID To change between entering an individual point ID different
and to the defined ID template and the running point ID accord-
Fn Run ing to the ID template. Refer to "26.3 ID templates".
Description of fields
Field Option
Point ID Editable field
Difference Display only
in height
from
remote
point to
base point
Hz Display only
V Display only
Slope dis- Display only
tance
Horizontal Display only
distance
Easting Display only
Northing Display only
Height Display only
Next step
IF
a remote point must be stored
a new base point must be measured
a code must be added

Configuring Remote Point

In Remote points press Fn Settings to access Remote points.
Description
Displays the point ID for the remote point.
The point ID in Measure Remote Point is
always identical to the point ID in Measure.
The elevation difference between the base
point and the remote point.
The current horizontal angle.
The current vertical angle.
The current slope distance to the remote
point calculated from the horizontal distance
to the base point and the current vertical
angle.
The horizontal distance measured to the
base point.
Calculated Easting coordinate for the remote
point.
Calculated Northing coordinate for the
remote point.
Calculated height for the remote point.
THEN
Store.
Base pt to return to the Measure
app.
change to the Code page.
435