Table of Contents
Advertisement
47.3
47.3.1
Stake Face/
Stake Profile,
page,
Check Profile,
page
818
For Profile generator
Field
Option
Start chain-
Editable field
age
End chain-
Editable field
age
Profiles
Editable field
interval
Staking/Checking the Tunnel
Overview
This panel is an example valid for Stake: Stake profile.
Key
Description
Measure
To measure a distance and store distance and angles.
Distance
To measure a distance.
Store
To store angles and distance. Distance must be measured
before.
Ch -
Available for Stake tunnel. To decrease the chainage as
defined by Chainage increment.
Profile +
To increase the distance along the profile. Available for Off-
set method: Profile, dist & offset and Offset
method: Dist from top&offset.
Ch +
Available for Stake tunnel. To increase the chainage as
defined by Chainage increment.
Page
To change to another page on this panel.
Fn Settings
To configure the app. Refer to "43.3 Configuring Roads
Apps".
Fn Position
Available for Stake tunnel. To stake the point automatically.
The instrument aims toward the point at the given chainage
and offsets and measures a distance. If this distance is not
within the required tolerance an iterative process is started
until:
the number of iterations set as the parameter Maximum
•
iterations is reached, or
the difference between the measured point and the
•
design point is less than the value set as the parameter
Position limit.
Description
Chainage of the first profile to check.
Chainage of the last profile to check.
Distance between a pair of consecutive
checked profiles.
Roads - Tunnel
Advertisement
Table of Contents
