Leica Captivate Technical Reference Manual page 917

Seismic Stakeout,
page
Seismic Stakeout
Refer to "51.4 Staking Out" for a description of the standard keys.
Key Description
Last To set the Slope to point to the last staked point.
Description of fields
Field Option
Azimuth Editable field
In-line Display only
Description
Direction from the current preplot point for
which the In-line and Cross-line offsets are
computed.
This azimuth value is automatically updated
each time the selected preplot point changes
in the 3D viewer.
If the Use track number optimization is
checked in the Define Line Settings panel,
then the computed azimuth is the one from
the first to the last point of the track.
If the Use track number optimization is
not checked in the Define Line Settings
panel, then the computed azimuth is based
on the next preplot point in the list. If no
next point is available, then the azimuth is
from the previous point to current one.
For specific validation, enter an azimuth
value.
Measured position in/out offset based on the
line from the current preplot point to the
given azimuth direction. Negative value is in.
917