Leica Captivate Technical Reference Manual page 586

Key
Stop
Store
Distance
Page
Fn Settings
Fn Connect
and
Fn Discon-
nect
Fn Tools
Description of fields
Field
Point ID
Antenna
height
Target
height
Chainage
Distance
along line
Line offset
Height dif-
ference
586
Description
For GS:
To end measuring the point being staked. When Automati-
cally stop point measurement is checked in GS Quality
Control, General page recording of positions ends automat-
ically as defined by the stop criteria. The key changes to
Store.
For GS:
To store the measured point. When Automatically store
point is checked in GS Quality Control, General page, the
measured point is stored automatically. The key changes to
Measure.
For TS:
To store angles and distance. Distance must be measured
before.
For TS:
To measure a distance.
To change to another page on this panel.
To configure the Measure to line/Stake to line app. Refer to
"41.3 Configuring Measure to line/Stake to line".
For GS:
To connect/disconnect from the reference data.
Refer to "37 Apps - The Toolbox".
Option Description
Selectable list The point ID of the point to be measured.
Editable field For GS:
The antenna height. Changes in the antenna
height do not update the antenna height as
defined in the active working style. The
changed antenna height is used until the app
is exited.
Editable field For TS:
The last used target height is suggested. An
individual target height can be typed in.
Display only Chainage of the current position along the
line. This value is the chainage of the start of
the line plus Distance along line.
Display only Horizontal distance from the start point to
the reference point along the line.
Display only Perpendicular offset from the line measured
from the reference point to the measured
point.
Display only Difference between measured height and
design height.
Measure to line/Stake to line