Leica Captivate Technical Reference Manual page 740

Key
Fn Method
Description of the methods
Method
Line
Local line
Surface
grade
Manual
slope
Local man-
ual slope
Slope
Crown
Layer
DTM
The available methods depend on the selected job types (road or design job):
Available
method
Line
Local line
Surface
grade
Manual
slope
Local man-
ual slope
Slope
Crown
Layer
DTM
740
Description
To define what is shown in the selectable list for Stake.
Description
To stake/check any type of line, for example a centreline or
kerb. Chainage information is related to the centreline.
Like the previous method when staking/checking any line of
a layer. The stake/check is always in relation to the chainage
of the line itself and not the centreline of the layer.
To stake/check a surface grade defined by the road design.
Two lines define the surface grade.
To stake/check a manually defined slope relative to an exist-
ing centreline. The slope is defined by one line and the slope
direction with ratio. The stake/check is always in relation to
the chainage of the line itself and not the centreline of the
layer.
To stake/check a manually defined slope relative to an exist-
ing hinge line. The slope is defined by one line and the slope
direction with ratio.
To stake/check a slope defined by two lines of the 3D road
design.
To stake/check a road crown defined by two surface grades
and one common line. The information for both surface
grades is displayed at the same time.
To stake/check a layer surface defined by the road design rel-
ative to the layer centreline.
To check a DTM surface. Available for Check road only.
Road job Design job
only only
-
ü
ü ü
-
ü
ü -
ü ü
-
ü
ü -
-
ü
- -
Road job, DTM job
points & only
lines job
-
ü
-
ü
- -
ü -
-
ü
- -
- -
- -
-
ü
Roads - Road