Leica Captivate Technical Reference Manual page 809

Use Heights From
DTM
46.4.3
Availability
Description
46.4.4
Availability
Description
Roads - Rail
Key Description
OK To confirm the settings and return to the Stake/Check panel.
Description of fields
Field Option
DTM Display only
DTM layer Selectable list
Use DTM Check box
height for
stake out
Show DTM Check box
height dif-
ference on
Info page
tab
DTM layer Selectable list
Apply current chainage
This menu function is available for stake.
To set Stake chainage on the
age.
Stake individual point
This menu function is available for stake.
To stake out points with known Easting, Northing and Height. Points can either
be selected from the job or manually typed in.
Description
DTM from the selected DTM job.
When selecting a DTM layer the relevant tri-
angle of the DTM is shown in 3D viewer.
When this box is checked, a layer of the DTM
is used as a height reference.
When this box is not checked, no DTM
heights are applied for stakeout or check.
When this box is checked, a layer of the DTM
to be used as a height reference on the
page.
When this box is not checked, no additional
height information relative to the DTM is
shown on the page.
Available when Show DTM height differ-
ence on Info page tab is checked. Layer of
the DTM to be used as a height reference.
When selecting a DTM layer the relevant tri-
angle of the DTM is shown in cross section
view in 3D viewer.
page of the stakeout to the current chain-
809