Edit Cross Section Assignments - Leica Captivate Technical Reference Manual

44.9
44.9.1
Description
Access
Cross Section Assign-
ments
734
Field Option
Offset & ht
to centre-
line
Horizontal Editable field
distance
Vertical dis- Editable field
tance
Horizontal Editable field
offset to
centreline
Vertical off- Editable field
set to cen-
treline
Slope dis- Editable field
tance
Slope ratio Editable field
Next step
Page changes to the Details page, where all entered and calculated elements
are displayed.

Edit Cross Section Assignments

Overview
Allows the creation, editing and deleting of cross section assignments as well
as checking the cross section assignments.
A cross section assignment defines from which chainage on a cross section
template is to be used.
In Alignment Editor Menu highlight Edit cross section assignmt. Press OK.
Key Description
OK To accept the panel entries and continue.
Description
Using a horizontal offset in relation to the
centreline and absolute height. Only available
for templates with Allow absolute heights
for cross section definition enabled.
Horizontal distance of the segment. Available
for Method: Horizontal distance & slope
and Method: Horiz & vertical distance.
Vertical distance of the segment. Available
for Method: Horiz & vertical distance.
Horizontal centreline offset of the segment.
Only available for Method: CL offsets.
Vertical centreline offset of the segment.
Only available for Method: CL offsets.
Slope distance of the segment. Only availa-
ble for Method: Slope distance & ratio.
Slope ratio of the segment. Available for
Method: Horizontal distance & slope and
Method: Slope distance & ratio.
Roads - Alignment Editor