Table of Contents
Advertisement
Regional,
Language page
Settings - System
Field
Option
Switch East-
Check box
ing for CAD
files and
Switch
Northing for
CAD files
Next step
Page changes to the Language page.
The languages available on the instrument. Three languages can be stored on
the instrument at one time - English and two others. English cannot be
deleted.
The selected language is used for the system software. If a language is not
available for the system software, the English language is used instead.
Apps are available in the languages that were loaded on the instrument when
the app was installed.
Key
Description
OK
To accept changes and return to Leica Captivate - Home.
Delete
To delete the highlighted language.
Page
To change to another page on this panel.
Next step
Page changes to the Others page.
Description
When these boxes are checked, then the
signs of the Easting and Northing coordi-
nates of CAD files are changed so that the
CAD file in the 3D viewer is mirrored. The
setting applies to all apps, including Roads.
☞
The signs of the Easting/Northing
coordinate only change for the dis-
play purposes. The signs are not
changed in the database.
☞
When importing/exporting dxf
data, the signs of the data are
switched according to the setting.
347
Advertisement
Table of Contents
