Leica Captivate Technical Reference Manual page 287

New Antenna or Edit
Antenna,
IGS page
23.3
Description
Settings - GS Sensor
Field Option
Vertical off- Editable field
set
L1 phase Editable field
offset
L2 phase Editable field
offset
Copy addi- Check box
tional cor-
rections
Next step
Page changes to the IGS page.
The combination of values typed in here provides a unique standardised ID for
the antenna being used.
Description of fields
Field Option
IGS name Editable field
Serial num- Editable field
ber
Setup num- Editable field
ber
Next step
Store stores the new antenna.
GNSS raw data logging
Logged raw observations are used for
static and kinematic operations. With these operations, raw data is always
•
post-processed in the office. Raw data must therefore be logged on both
base and rover instruments.
real-time operations
•
to check the work in the office by post-processing.
OR
to fill in gaps when a real-time position could not be calculated in the
field, for example, due to problems with the real-time data reception
from the reference station or the RTK network provider
Observations must be logged on all instruments which are used for post-pro-
cessing.
Description
Vertical offset of measurement reference
point.
Offset of L1 phase centre.
Offset of L2 phase centre.
Allows extra corrections to be copied from
the antenna which was highlighted before
this panel was accessed.
Description
The International GPS/GNSS Service name of
the antenna.
The serial number of the antenna.
The setup number of the antenna. Identifies
the version number of the current calibra-
tion.
287