Leica Captivate Technical Reference Manual page 727

Roads - Alignment Editor
Field Option
Int height Editable field
End chain- Editable field
age
End height Editable field
Grade in Editable field
Grade out Editable field
For Element type: Curve
Field Option
Curve type Crest
Sag
Radius Editable field
Length Editable field
End chain- Editable field
age
End height Editable field
Description
Second elevation. Type in manually or press
Get point when the focus is on this line to
select the height from an existing point in
the job. Available for Method:3 heights.
Chainage at the end of the element. Availa-
ble for Method:End chainage & grades
and Method:3 heights.
Height at the end of the element. Type in
manually or, alternatively, press Get point
when the focus is on this line to select the
height from an existing point in the job.
Available for Method:Parameter & end
height and Method:3 heights.
The grade at the beginning of the parabola.
Positive inclines have positive values, nega-
tive inclines have negative values. Available
for parabolas with Method:Length &
grades and Method:End chainage &
grades.
The grade at the end of the parabola. Posi-
tive inclines have positive values, negative
inclines have negative values. Available for
Method:Length & grades and Method:End
chainage & grades.
Description
The curve type is convex.
The curve type is concave.
Radius of the curve. Available for
Method:Radius & length, Method:Radius
& end chainage and Method:Radius &
grades.
Length of the curve along the segment.
Available for Method:Radius & length and
Method:Length & grades.
Chainage at the end of the element. Availa-
ble for Method:End chainage & grades
and Method:Radius & end chainage.
Height at the end of the element. Type in
manually or, alternatively, press Get point
when the focus is on this line to select the
height from an existing point in the job.
Available for Method:Radius & length and
Method:Radius & end chainage.
727