Edit Horizontal Alignments Using Pis - Leica Captivate Technical Reference Manual

44.5
44.5.1
Description
Access
Horizontal Alignment,
PI page
Roads - Alignment Editor
Field Option
Length Editable field
End chain- Editable field
age
End easting Editable field
End north- Editable field
ing
Next step
Page changes to the Details page, where all entered and calculated elements
are displayed.

Edit Horizontal Alignments Using PIs

Overview
Allows creating, editing and deleting PIs by chainage, easting and northing.
In Alignment Editor Menu highlight Edit horizontal alignment. Press OK.
☞ Use PI instead of element for horizontal alignment definition
must be checked in Measure Settings, Advanced page.
Key Description
OK To accept the panel entries and return to the Alignment
Editor Menu.
Add To add a new horizontal PI after the highlighted PI.
☞
Edit To edit the highlighted PI of the horizontal alignment.
Delete To delete the highlighted PI of the horizontal alignment.
Either all following elements or only the next element can be
adjusted.
Description
Length of the bloss curve element. Available
for Method:Radius & length and
Method:Radius, length & end coords.
The end chainage of the bloss curve element
can be typed in. Available for
Method:Radius & end chainage.
Easting for the end chainage. Available for
Method:Radius, length & end coords.
Northing for the end chainage. Available for
Method:Radius, length & end coords.
The chainage values must be added in the correct
order.
719