Leica Captivate Technical Reference Manual page 749

Roads - Road
Description of fields
Common to all types
Field Option
Use Check box
advanced
slope stake-
out
Type Reference
point
Batter rail
vertical
Batter rail
perpendicu-
lar
Ref batter
vertical
Ref batter
perpendicu-
lar
Ref point
surface
For Type: Reference point
Field Option
Ref offset Editable field
For Type: Batter rail vertical and Type: Batter rail perpendicular
Field Option
Batter type Cut or
Fill
Traveller Editable field
height
Description
When this box is checked, slope stakeout
settings are available.
Stakeout of a reference peg with a defined
offset from the catch point. Refer to "Slope
staking using Reference point".
Stakeout of batter rails using defined rail
heights vertically above the batter.
Refer to "Slope staking using Batter rail verti-
cal or Batter rail perpendicular".
Stakeout of batter rails using defined rail
heights perpendicularly above the batter.
Refer to "Slope staking using Batter rail verti-
cal or Batter rail perpendicular".
Stakeout of batter rails using defined rail
heights vertically above the batter. The inner-
most peg/stake is offset at a defined hori-
zontal distance from the catch point.
Refer to "Slope staking using Ref batter verti-
cal or Ref batter perpendicular".
Stakeout of batter rails using defined rail
heights perpendicularly above the batter. The
innermost peg/stake is offset at a defined
horizontal distance from the catch point.
Refer to "Slope staking using Ref batter verti-
cal or Ref batter perpendicular"
Stakeout of a reference peg in the slope sur-
face with a defined height difference to the
hinge point. Slope values for the reference
point cannot be entered.
Refer to "Slope staking using Ref point sur-
face".
Description
The defined offset of the reference point
from the catch point.
Description
Defines the cut or fill rail.
Depending on the selected Type, the vertical
or perpendicular height of the rail top above
the batter.
749