Table of Contents
Advertisement
Job properties,
CAD files page
68
Metadata
Description
Main Job
Created control data such as points and lines are stored in
the main job.
To make a job the main job, highlight the job and press Fn
Main job.
As long as there is at least one available linked job, there
must be a main job where the created points and lines are
stored if created.
If no linked job is available, for example all are deleted, or all
are on an SD card which is not inserted, then there is no
main job.
If the main job is deleted, then the role of main job jumps to
another linked job.
if the main job is set as Hidden, the role of main job stays in
that job.
Source
The data storage device where the job is stored.
If the working job and/or linked jobs are moved to another
device, the link between both is remembered.
Source: ----- indicates that the source job of the data is not
available in the expected data storage device.
☞
☞
Date cre-
The date of when the job was created.
ated
Next step
Page changes to the CAD files page.
Key
Description
Store
To store the settings.
Add
To select a CAD file to be added to the job properties. The
panel that opens is similar to New Job, CAD files page.
Refer to "6.2 Creating a New Job" for a description of the
panel.
If the data storage device containing one or more
control jobs is taken out off the instrument, the
jobs will NOT be available in the data set anymore.
Every time an app is started, the availability of
control jobs is checked. The check ensures the cor-
respondency between the list of linked jobs and
the data set.
Job Menu - Jobs
Advertisement
Table of Contents
