Leica Captivate Technical Reference Manual page 622

materials/surfaces which form the road/tunnel. The design data can be viewed
and partially edited on this panel.
Key
OK
Edit
View
Fn Settings
Description of fields
Field
Job name
Layer
Number of
lines
Number of
profiles
Centreline
Chainage
Ch incre-
ment
622
Description
To return to the job selection.
To edit the general job details and the start chainage of the
centreline of the selected layer.
For Road additionally to select another centreline and
include/exclude lines from the selected layer.
To view geometry details of the lines and to view cross sec-
tion plots.
For Road and Rail additionally to view the list of all lines in
the layer.
To access the settings. Refer to "43.3 Configuring Roads
Apps".
Option Description
Display only The name of the active road/rail/tunnel job,
as selected in the job selection panel.
Display only To select a layer from the active road/rail/
tunnel job. All layers within the active road/
rail/tunnel job can be selected.
Display only Available for Road and Rail. The number of
lines from the selected layer.
Display only Available for Tunnel. The number of profiles
from the selected layer.
Display only The name of the layer centreline.
☞
Editable field To enter chainage to use when viewing the
data. The default value is the start chainage
of the layer centreline.
Editable field To enter a chainage increment to use when
stepping through the data.
Every layer must have a centreline.
Roads - General