58
58.1
Description
☞
Types of traverse
58.2
Access
Traverse
Traverse
Traverse
Overview
The Traverse app is used to fulfil one of the most common operations done by
surveyors; to establish a control point base system to be used as a skeleton for
other survey operations. For example, topographic survey, point stakeout, line
stakeout or road stakeout.
If the message panel appears which requires that the app must be activated
using a licence key then refer to "29.3 Load licence keys".
External reference & closed loop
•
•
Internal reference & position check
Open end & position check
•
Closed end traverse
•
P2
P1
P5
P3
P4
TS_049
Accessing Traverse
Select Leica Captivate - Home: Traverse.
☞
If traverses exist, then the Traverse panel opens. If no traverse
exists, then the New Traverse panel opens.
Key
Description
OK
To select the highlighted option and to continue with the
subsequent panel.
Fn Settings
To configure the Traverse app. Refer to "58.6 Configuring
Traverse".
P1
P2
P6
P10
P3
P4
P5
P6
P8
P7
P8
P9
P9
P7
P10
Traverse point
Backsight point
Traverse point
Sideshot point
Traverse point
Sideshot point
Sideshot point
Closing point
Sideshot point
Closing angle point
949