Leica Captivate Technical Reference Manual page 632

Road Settings,
Design page
632
Description of fields
Field Option
Allow edit- Check box
ing the
height of
the location
being
staked
Next step
Page changes to the Design page.
Description of fields
Field Option
Working Editable field
corridor
Show tan- Check box
gent points
Type
Horizontal
Vertical
Horizontal
& vertical
Slope signs
Mathemati-
cal
Description
When this box is checked, a height value
typed in manually is used instead of design
height or DTM height. When this box is not
checked, the height from design is used.
Description
Valid offset range defined by the working
corridor left and right of the centreline. If a
measured point is further away from the
working corridor distance, an error message
is displayed.
Refer to "43.6 Understanding Terms and
Expressions" for more information on the
working corridor.
When this box is checked, a message box is
shown when a tangent point (PI or PVI) has
been detected within the chainage increment
range. This tangent point can be selected for
stakeout.
When this box is not checked, no tangent
points are indicated.
Available when Show tangent points is
checked.
Indicates tangent points of the horizontal
alignment only.
Indicates tangent points of the vertical align-
ment only.
Indicates all tangent points.
Available for Road only. Selects sign defini-
tion method for slopes and surface grades.
All slope signs defined from left to right,
independent of whether left or right of the
centreline.
+
+
Road_054c
+
Roads - General