Leica Captivate Technical Reference Manual page 611

Measure Points to
Plane,
page
Reference Plane & Grid Scan
Key Description
Measure For GS:
To start measuring the point. The key changes to Stop. The
difference between the current position and the adjusted
plane is displayed.
Stop For GS:
To end measuring the point. The key changes to Store. After
ending the measurement, the differences between the
measured point and the adjusted plane are displayed.
Measure For TS:
To measure a distance and store distance and angles.
Distance For TS:
To measure a distance.
Store To store the point information.
Compare To calculate offsets to previously measured points.
Done To finish measuring points.
Fn Tools Refer to "37 Apps - The Toolbox".
Description of fields
Field Option
Point ID Editable field
Target Editable field
height
Antenna Editable field
height
Perpendicu- Display only
lar offset
distance
Offset Display only
height
X coordi- Display only
nate, Y
coordinate,
Z coordinate
Description
The number of the measured point.
For TS:
The target height.
For GS:
The height of the antenna.
The perpendicular distance between the
measured point and the adjusted plane.
The vertical distance between the measured
point and the adjusted plane.
Available when Use local plane coordinate
system is checked in Edit Plane, Origin.
611