Leica Captivate Technical Reference Manual page 383

Object Display,
Points page
Object Display,
Lines & alignments
page
Camera & Imaging
Field Option
Crosshairs Selectable list
colour
Next step
Page to change to the Points page.
Description of fields
Field Option
Points Check box
Point IDs, Check box
Point codes,
Height of
points
Only show Check box
points
measured
from cur-
rent setup
Next step
Page changes to the Lines & alignments page.
Description of fields
Field Option
Lines Check box
Line IDs Check box
Description
Available if Display crosshairs is checked.
Defines the colour of the crosshairs.
Description
When this box is checked, points from the
job with 3D local grid coordinates are dis-
played on the view finder. Use the display of
points to check completeness and reliability
of the survey.
Points are displayed with a visual 3D effect:
Points further away from the instrument are
displayed smaller than points closer to the
instrument.
When this box is checked, the relevant infor-
mation of a measured point is displayed next
to the point symbol.
In addition to the selected number of points,
the points displayed can be restricted further
by showing only points measured from the
current setup.
Description
When this box is checked, lines from the job
with 3D local grid coordinates are displayed
on the view finder. Use the display of points
to check completeness and reliability of the
survey.
Points are displayed with a visual 3D effect:
Points further away from the instrument are
displayed smaller than points closer to the
instrument.
☞
Points are only displayed on the
image. They are not saved with the
image.
When this box is checked, then the line IDs
are displayed with the lines.
383