Table of Contents
Advertisement
29
29.1
Description
Access
Transfer User Objects
Settings - Tools
Settings - Tools
Transfer user objects
This chapter describes the basic procedure for
transferring objects between the data storage device and the internal
•
memory.
•
sending a job from the field controller to the TS and vice versa. The TS
menu cannot be used when it is connected to the field controller. The
commands for sending the jobs from and to the TS must be operated from
the field controller only.
Refer to "B Directory Structure of the Memory Device" for information about
file types and locations of files on the data storage device.
Select Leica Captivate - Home: Settings\Tools\Transfer user objects.
Key
Description
OK
To transfer an object and return to the panel from where this
panel was accessed.
For transfer between TS and field controller, the job is trans-
ferred through Bluetooth, radio or cable.
For transfer between TS and field controller with jobs larger
than 1 MB:
The transfer time is estimated and displayed. Press Yes
•
to start the transfer or No to cancel.
A progress bar indicates the progress of the transfer.
•
Description of fields
Field
Option
Object to
Selectable list
transfer
From
SD card
Description
Listed are the objects that can be transfer-
red. The available fields on the panel depend
on the option selected.
Data storage device to transfer object from.
Transfer from the Secure Digital Memory
card. Unavailable for CS35.
351
Advertisement
Table of Contents
