Table of Contents
Advertisement
Save Line Report,
Points page
Define Shifts
580
Field
Option
From job
Selectable list
Line
Selectable list
The report displays information on the points that have been measured with
the current selected design job, and current select line.
Key
Description
OK
To return to the panel from which this panel was accessed.
Edit
To edit details of the highlighted point.
Save
To save the alignment report.
More
To change the values displayed between Offset, Cut/fill,
Measured height, Design ht, Point ID and Pt code.
Page
To change to another page on this panel.
Next step
Page changes to the 3D viewer page. Use Ch- and Ch+ to the previous or
next measured point.
☞
3D viewer is not updated with shifts.
Key
Description
OK
To confirm the selections and to return to the previous panel.
Description of fields
Field
Option
Apply shift
Check box
Horizontal
Editable field
Vertical
Editable field
Description
All jobs are available for selection.
Line from the selected Road job. The line
must be stored in the \DBX folder of the data
storage device to be selectable.
Description
Check to apply a shift.
Distance to shift the line horizontally to the
left or right.
The vertical shift of the line.
Measure to line/Stake to line
Advertisement
Table of Contents
