Table of Contents
Advertisement
37.3
Description
Check Point
432
Field
Option
Difference
Display only
in azimuth
Difference
Display only
in horizon-
tal distance
Difference
Display only
in height
Check Point
This panel is used to check if a measured point is identical to a point already
stored in the job, or if the orientation of the instrument to a backsight point is
still correct.
Key
Description
Back
To return to the app.
Distance
To measure a distance.
Store
To store the result of the point check. The result can be
exported as part of the current job.
Turn to
To position to the selected point.
For Aim at target: Automatic the instrument does an ATR-
plus search.
For Aim at target: Lock the instrument tries to lock on to a
prism.
More
To display additional information.
Last
To recall the point ID of the last checked point.
Description of fields
Field
Option
Point ID
Selectable list
Target
Editable field
height
Target
Selectable list
Description
The difference in horizontal angle between
the setup point and the backsight point.
The difference between the calculated hori-
zontal distance from setup to backsight point
and the measured horizontal distance.
The vertical distance between the setup
point and the backsight point.
Description
Point ID to be checked.
If a stored point was checked, the point ID
for that point is remembered and recalled
when Last is pressed.
The last used prism height is suggested. An
individual prism height can be typed in.
Target names as configured in the Targets
panel.
Apps - The Toolbox
Advertisement
Table of Contents
