Table of Contents
Advertisement
Field
Additional
line
Additional
line chain-
age
Additional
line offset
Additional
line ht diff
CL height
diff
CL height
CL radius
CL type
CL offset
CL tangent
Offset angle The current angle to selected line.
Nearest hz
tangent
point
Nearest ver-
tical tan-
gent point
Height dif-
ference at
3D chainage
3D chainage
648
Description
The name of an extra line.
Current local chainage of extra line.
Current perpendicular offset to the additional line including
the defined stake/check offset of extra line of the
Current height difference to the additional line including the
defined stake/check height difference of the additional line
of
page.
Height difference from the centreline.
Height of the centreline at the current chainage.
Radius of the centreline at the current chainage.
Element type of the centreline.
Perpendicular horizontal offset from the centreline. This field
is independent of the chosen settings for Help me navigate
and Navigational arrow types in Road Settings, Graphics
page.
Tangent direction of the centreline at the current chainage.
The chainage difference between the measured point and
the nearest tangent point of the design is displayed. The
nearest tangent point is the start/end point of a road seg-
ment.
a b
Road_099
a
Vertical alignment
b
Horizontal alignment
Only tangent points are detected. A tangent point is the
start/end point of a road segment.
Distance to the nearest vertical tangent point of the design.
Offset perpendicular to the vertical component of the selec-
ted line.
This value can be useful when dealing with pipelines, cables
and in the construction segment.
Chainage of the measured point is projected perpendicular to
the vertical component of the selected line.
page.
Roads - General
Advertisement
Table of Contents
