Table of Contents
Advertisement
60.4.3
Access
Define plane or cylin-
der
984
Key
Description
OK
To continue to the next panel.
Fn Settings
To configure the app. Refer to "60.3 Configuring Inspect sur-
faces".
Fn Display
To configure what is displayed in 3D viewer.
Fn Layers
To turn CAD layers on or off.
Fn Filter
To define sort and filter settings. Refer to "7.6 Point Sorting
and Filters".
Fn Page
To change to another page on this panel.
Next step
OK to access Define Object to Compare.
From a Pre-Defined Plane or Solid
Select From a pre-defined plane or solid in Define Reference Surface.
Select from:
•
Horizontal plane
Choose or measure a point to define the height of the horizontal plane.
Vertical plane
•
Choose or measure two points to define the vertical plane.
Plane defined by three points
•
Choose or measure three points to define the plane.
Cylinder
•
Choose or measure two points to define the axis of the cylinder and enter
the radius of the cylinder.
Cone
•
Choose or measure two points to define the axis of the cone, and enter
the radius for the two bases.
Key
Description
OK
To continue to the next panel.
Meas app
To measure a point manually for the plane definition. Availa-
ble when Point, 1st point, 2nd point or 3rd point is high-
lighted.
Fn Settings
To configure the app. Refer to "60.3 Configuring Inspect sur-
faces".
Description of fields
Field
Option
Point
Selectable list
Description
The point ID of the point defining the height
of a horizontal plane.
Available for Horizontal plane (defined by
one point).
Inspect Surfaces
Advertisement
Table of Contents
