Table of Contents
Advertisement
Foresight
456
Key
Description
Page
To change to another page on this panel.
Description of fields
Field
Option
Backsight ID
Editable field
Target
Editable field
height
Computed
Display only
direction
Computed
Display only
horizontal
distance
Difference
Display only
in horizon-
tal distance
Computed
Display only
slope dist
Difference
Display only
in slope dis-
tance
Difference
Display only
in height
Next step
Set starts backsight-foresight set measurements.
Key
Description
Measure
To measure and record the foresight point. The measurement
settings for the first measurement to each point are used for
all further sets.
Distance
To measure and display distances.
Store
To record data.
Description of fields
Field
Option
Foresight ID
Editable field
Target
Editable field
height
Number of
Editable field
sets
Description
Point ID of the backsight point.
Height of the target above or below the
backsight point. The last setup target height
is always remembered.
Displays the calculated azimuth from the
selected setup to the backsight point.
Displays the calculated horizontal distance
between the selected setup and backsight
point.
The difference between the calculated hori-
zontal distance from setup to backsight point
and the measured horizontal distance.
Displayed after More was pressed. The cal-
culated slope distance to the backsight
point.
Displayed after More was pressed. The dif-
ference between the calculated slope dis-
tance from setup to backsight point and the
measured slope distance.
The difference between the design height of
the backsight point and the measured height
of the backsight point. If the backsight point
is a 2D point, this field shows -----.
Description
The name of the foresight point.
The target height of the foresight point.
The number of sets to be measured.
Apps - The Toolbox
Advertisement
Table of Contents
