Table of Contents
Advertisement
Stake Face/
Stake Profile/
Check Profile/
Scan Profile,
page
Roads - Tunnel
Field
Option
After instru-
Editable field
ment
c
Tunnel_030
a
Alignment
b
Instrument chainage
c
Start chainage or Start distance
d
End chainage or End distance
e
Before instrument
f
After instrument
Next step
Page changes to the
Refer to "Stake Face/Stake Profile,page,Check Profile,page" for a description of
keys.
Description of fields
Common for all methods
Field
Option
Use offsets
Check box
For Stake tunnel
Field
Option
Offset
method
Description
If the scan area ends after the station chain-
age then define how often to scan a profile
along the alignment from the station chain-
age or start chainage until the defined end
chainage/distance. The chainage which as a
greater chainage is used.
e
f
b
page.
Description
When this box is checked, horizontal and
vertical offsets can be applied.
☞
For Scan Profile, the setting does
not offset or expand/shrink the
design profile.
Description
To define the position of the point to be
staked out.
d
a
821
Advertisement
Table of Contents
