Table of Contents
Advertisement
Description of fields
For all devices available
Field
Name
For RS232
Field
Type
Port
Bluetooth
For digital cellular phones and modems
Field
Type
Port
Firmware
Operator
Network type
Status
Bluetooth
Signal
For radios
The available fields depend on the radio type.
Field
Type
Port
Channel
Frequency
Channel spacing
Firmware
44
Description
The name of the device.
Description
The type of device.
The port to which the device is connected.
Available if device is connected using Bluetooth. Indi-
cates the state of the connection.
Description
The type of device.
The port to which the device is connected.
The software version of the attached digital cellular
phone.
The name of the network operator in which the digi-
tal cellular phone is operating.
The type of reference network selected in RTK Rover
Settings. Refer to "RTK Rover Settings,RTK network
page".
The current mode of the digital cellular phone. The
options are Unknown, Detection and Registered.
Available if device is connected using Bluetooth. Indi-
cates the state of the connection. Unavailable for CS
modem.
Indication of received signal strength of the digital
cellular phone network.
Description
The type of device.
The port to which the device is connected.
The radio channel.
The current set frequency of the radio.
Channel spacing assigned to the channel in kHz.
The frequency spacing between channels depends
on the radio used.
The software version of the attached radio.
Icon Pop-up Bubbles
Advertisement
Table of Contents
