53.3
Description
Access
Over Any Point
Enter point ID & press
'Next' when ready to
measure point
Leica Captivate - Base - Start base
Next step
Next to access Base setup complete.. Follow the instructions on the panel.
Over any point
To use the coordinates of the current navigation position as base coordinates.
Select Leica Captivate - Base: Base setup\Over any point.
This panel is identical with the one in Over known point. Refer to "53.1 Over
known point".
Next step
Next to access Enter point ID & press 'Next' when ready to measure
point.
Type in a point ID for this new point. Refer to 53.1 Over known point for infor-
mation on the keys.
Code information or annotations can be added in the rover menu.
Next step
Next to access Base setup complete.. Follow the instructions on the panel.
921