Table of Contents
Advertisement
RTK Base Settings
(RTK 1)/
RTK Base Settings
(RTK 2),
Data rates page
Connections - All other connections
Field
Option
RTCM ver-
1.x, 2.1, 2.2
sion
or 2.3
Use exter-
Check box
nal antenna
on GS15
Next step
Page changes to the Data rates page.
Description
For all real-time data formats, parts of the message can be output at different
rates.
The settings on this panel define the output rates for the various parts of the
selected real-time data format. The available fields on this panel depend on
the selected setting for RTK data format in RTK Base Settings (RTK 1)/RTK
Base Settings (RTK 2).
Description of fields
Field
Option
RTK data
Display only
format
Data
From 0.1s to
60.0s
Message
type
Compact
Extended
Coordinates
From 10s to
120s
Information
From 10s to
120s
Off
End of mes-
Nothing or
sage
CR
Description
Available when the selected RTK data for-
mat is an RTCM version 2 format. The same
version must be used at the reference and
the rover.
Available for Connect using: GS Port 3.
Allows external radio/GSM antenna on the
GS15 to be used for slot devices.
Description
The selected data format.
Rates for the transmission of raw observa-
tions. The default settings are suitable for
standard applications. They can be changed
for special applications. A check is performed
for permissible combinations.
The message type of RTCM v3 and Leica
4G.
Suitable for standard applications.
For RTK data format: RTCM v3 (MSM),
encoding according to MSM3. Refer to "RTK
Rover Settings,General page".
For RTK data format: RTCM v3 (MSM),
encoding according to MSM5. Refer to "RTK
Rover Settings,General page".
Rate for the transmission of reference coor-
dinates.
Rate for the transmission of base station
information such as point ID.
Available for RTCM v3 (MSM). No receiver
and antenna descriptors information mes-
sage is sent out. Default for Message type:
Compact.
To add a Carriage Return at the end of the
real-time message.
197
Advertisement
Table of Contents
