Leica Captivate Technical Reference Manual page 198

RTK Base Settings
(RTK 1)/
RTK Base Settings
(RTK 2),
Time slicing page
198
Field Option
Messages to Selectable list
be streamed
(local coor-
dinates will
be compu-
ted using
the coordi-
nate system
on the GS
sensor)
RTK base ID Editable field
From 0 to 31
From 0 to
1023
From 0 to
4095
Next step
Page changes to the Time slicing page.
Description of fields
Field Option
Use time Check box
slicing
Total base 2, 3 or 4
stations
being used
Description
Available for RTCM version: 2.3. The mes-
sages sent within the coordinate message.
An identification for a base station. It is con-
verted into a compact format and sent out
with real-time data in all real-time data for-
mats. It is different from the point ID of the
base station.
If working with several base stations in time
slicing mode on the same frequency, an ID of
the base station is required. In this case, the
ID of the base station from which data is
accepted must be typed in at the rover.
The allowed minimum and maximum values
vary.
For Leica and CMR/CMR+.
For any RTCM version 2 format.
For Leica 4G, RTCM v3 and RTCM v3
(MSM).
Description
The possibility to send delayed real-time
messages. This functionality is required when
real-time messages from different base sta-
tions are sent on the same radio channel.
Time slicing works for all device types.
The number of base stations in use from
where real-time messages are sent.
Connections - All other connections