Leica Captivate Technical Reference Manual page 743

Roads - Road
Field Option
Left line Selectable list
Right line Display only
Reference Left line or
line Right line
Show infor- Check box
mation to
an addi-
tional line
Additional Selectable list
line
For Stake: Manual slope and Stake: Local manual slope
Field Option
On the Slope page:
Working Editable field
chainage
Hinge line Selectable list
Description
The name of the left line defining the surface
grade. Refer to "45.2.2 Selecting a Line".
The name of the right line defining the sur-
face grade.
To select one of the lines to be used as the
reference line.
When this box is checked, a second line can
be selected.
Allows chainage, offset and height difference
information to be obtained from any other
string of the layer independent from those
strings currently used. For example: Staking a
surface grade where the height information
comes from the surface grade but the chain-
age information comes from a string which is
not the centreline of the current layer.
The lines available as second lines, inde-
pendent of the Working chainage. Or select
a line in 3D viewer.
Description
The chainage for the stake/check survey. The
chainage can range between the start chain-
age and the end chainage of selected line.
To select the hinge point of the slope. Or
select a line in 3D viewer.
☞
For Manual slope, only lines from
the Road job can be selected.
743