Exporting Data From A Job To A Custom Format; Export Ascii - Leica Captivate Technical Reference Manual

11.3
Description
Requirements
Access
Export ASCII (Format
File)
Job Menu - Export data

Exporting Data from a Job to a Custom Format

The settings on this panel define the data that is converted and exported and
what format is used.
Data is exported from the selected job. Currently active view, filter and sort set-
tings are applied.
At least one format file was created using Leica Geo Office or Leica Instrument
Tools and transferred to the internal memory.
From the job menu select Export data\ASCII with format file.
Key Description
OK To select the highlighted format file.
Fn Settings To configure the default extension to be used.
Fn Filter To define the order in which points and lines are exported as
well as which points are exported.
Fn Coord To update the coordinate system in which the coordinates
sys are exported.
Description of fields
Field Option
Job Selectable list
Format file Selectable list
To device Selectable list
To folder Selectable list
Connect Display only
using
Description
To select the job to export.
The format files currently available in the
internal memory.
Defines where the exported data are saved
to.
☞
For To device: Internal memory
the data is always exported to the
\DATA directory.
Available for To device: SD card, and To
device: USB. The data can be exported to
the \DATA, the \GSI or the root directory or to
the folder where the selected job is located.
Data must be stored to the \GSI directory to
be read in a TS instrument.
Available for To device: RS232. The port
currently configured for the RS232 interface.
135