Defining A Segment Of A Line; Defining Line Slopes - Leica Captivate Technical Reference Manual

41.4.3
Description
Define Segment,
Segment page
41.4.4
Description
Measure to line/Stake to line
Field Option
Rotate line Editable field

Defining a Segment of a Line

Define Segment, Segment page appears when the selected method is Seg-
ment, Segment with slope or Grid. A segment can be a straight or an arc.
Key Description
OK To accept changes and continue with the subsequent panel.
Shifts To apply horizontal and vertical shifts to the selected seg-
ment. Refer to "Define Shifts".
Segment - To select the previous/next segment in the line.
or
Segment +
Page To change to another page on this panel.
Fn Settings To configure the Measure to line/Stake to line app.
Description of fields
Field Option
Line Display only
Segment Editable field
number
Segment Display only
type
Segment Display only
length
Start chain- Display only
age

Defining Line Slopes

It is possible to define slopes for line. When measuring or staking to the line,
additional information about the position relative to the slope is displayed.
Stakeout values still refer to the line. For the
relative to the slope can be configured in Settings, Info page.
Description
Available for Measure: Quick Line.
To rotate the line by the defined angle value
- clockwise if not defined otherwise in
Regional.
☞
If values are entered for both
Rotate line and Horizontal, the
horizontal shift is applied to the
rotated line.
Description
The current line.
The line segment number to work with. A
polyline is split into segments, naming from 1
upwards.
The selected line type as straight or arc.
The horizontal grid distance between the
two points of the line segment.
The beginning chainage of the line segment.
page, additional information
581