Using Azimuth Point - Leica Captivate Technical Reference Manual

Using azimuth point

Apps - The Toolbox
Follow the instructions on the panel.
Description
The azimuth for a hidden point measurement can be computed using an auxili-
ary point. The auxiliary point
can exist in the job.
•
can be manually measured during the hidden point measurements.
•
can be manually typed in.
•
The location of the auxiliary point can be in the direction towards the hidden
point or away from the hidden point.
Diagram
P2
P1
P0
GS_071
P0
P1
GS_072
Requirements
Bearing & distance, Using 2 bearings or Back bearing & distance must be
selected for Method.
Access
In Measure Hidden Point highlight Azimuth. Press Azimuth.
P0 Known point
P1 Auxiliary point, Azimuth Pt
P2 Hidden point
α Bearing from P2 to P0
P2
P0 Known point
P1 Auxiliary point, Azimuth Pt
P2 Hidden point
Bearing from P0 to P2
α
449