Table of Contents
Advertisement
18.4.2
Access
Send Command to
Device
18.5
Description
Connections - All other connections
Field
Option
Prefix
Check box
'@<Desc>@'
when writ-
ing
Next step
Page changes to another page on this panel.
Configuration of a Command to the Device
For RTK rover:
•
In ASCII Input, ASCII input page, Fn Command.
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
Send
To send the command to the device.
Description of fields
Field
Option
Command
Editable field
Hidden point
Hidden point measurement devices are used for measuring to points which
cannot be directly measured with GNSS, for example house corners or trees.
The measurements made with a hidden point measurement device are directly
Description
[ ] To accept a set of characters. For exam-
ple, [0-9] accepts all numbers.
Any characters to accept strings that include
the characters at any position. For example 1
accepts 1234, 4321 or 2134 but not 2345.
Stores the description in Message desc as
prefix to the ASCII message. This prefix helps
to more easily identify the annotations regis-
tered with a point.
Description
A message to be sent to the device through
the configured port when the Measure or
stake app is accessed. This functionality, for
example, allows the device to be started
remotely. The last used command that was
entered is remembered as part of the active
working style.
179
Advertisement
Table of Contents
