Table of Contents
Advertisement
Monitoring interval
868
Field
Option
Begin time
Editable field
End date
Editable field
End time
Editable field
Interval
Editable field
Measure-
ment
method
A'A"B"B'
A'A"B'B"
A'B'A"B"
A'B'B"A"
A'B'C'D'
Next step
When all required information is entered press OK to begin the monitoring
process.
A panel displays a notice that monitoring is in progress. If necessary, press
Cancel to stop the monitoring process and return to Measure sets of angles.
Refer to "49.2 Sets of Angles" for information about calculations and the view-
ing of results.
Description
The dates and times entered define the timeframe for when the monitoring will
take place.
The time interval defines the time between the start of each measurement set
during the monitoring period. The interval time begins at the start of a meas-
urement set and ends at the start of the next measurement set.
Example
Data;
3 target points
•
•
Begin Date: 03.11.2010
•
End Date: 06.11.2010
Interval: 30 min
•
Description
Start time for monitoring.
End date for monitoring.
End time for monitoring.
The time between the start of each sched-
uled measurement set.
Determines the order in which the target
points are measured.
The target points are measured in face I and
face II.
point A I - point A II - point B II - point B I ...
The target points are measured in face I and
face II.
point A I - point A II - point B I - point B II ...
The target points are measured in face I and
face II.
point A I - point B I... point A II - point B II ...
The target points are measured in face I and
face II.
point A I - point B I... point B II - point A II...
The target points are only measured in face I.
point A I - point B I - point C I - point D I ...
4 measure sets
•
•
Begin Time: 14:00:00
•
End Time: 14:00:00
Sets of Angles - TS
Advertisement
Table of Contents
