Creating A Reference Plane From Previously Stored Points - Leica Captivate Technical Reference Manual

42.3
Access step-by-step
602
Key Description
OK To accept changes and to continue with the subsequent
panel.
Fn Settings To configure the reference plane. Refer to "42.5 Configuring
Reference Plane & Grid Scan".
Description of the Reference Plane & Grid Scan tasks
Task Description
Measure to The coordinates of measured points are calculated relative to
plane the reference plane.
Grid scan on For TS:
plane Measures a regular grid on a defined reference plane within a
defined area.
Grid scan on For TS:
surface Measures any surface within a defined area.
Next step
IF
Task: Measure to plane or
Grid scan on plane
Task: Grid scan on surface

Creating a Reference Plane From Previously Stored Points

1. In Plane & Grid Scan, select Create a new plane from previously
stored points.
2. Press OK.
3. In New Plane, type in the name of the reference plane.
4. Press OK.
THEN
OK.
To create a plane by measuring points,
•
enter a name for the reference plane.
New points can be measured by starting
the Measure app.
To create a plane from previously stored
•
points, enter a name for the reference
plane. Refer to "42.3 Creating a Refer-
ence Plane From Previously Stored
Points".
For selecting an existing reference plane
•
from a job, refer to "42.4 Selecting a
Reference Plane from a Job". Only availa-
ble when a reference plane has already
been stored in the current job.
OK accesses Define Grid Scan Area. Refer
to "42.9 Grid Scan on Surface - TS".
Reference Plane & Grid Scan