Table of Contents
Advertisement
Settings,
General page
872
Key
Description
OK
To accept changes and return to the panel from where this
panel was accessed.
Page
To change to another page on this panel.
Fn About
To display information about the app name, the version num-
ber, the date of the version, the copyright and the article
number.
Description of fields
Field
Option
Use two
Check box
face meas-
urements
Show con-
Check box
firmation
message
when setup
is complete
Description
Defines if the instrument measures the sec-
ond face automatically after storing the first.
When this box is checked, after storing a
measurement with All or Store motorised
instruments change face automatically, non-
motorised instruments access Telescope
Positioning. The measurements of faceI and
faceII are averaged. The averaged value is
stored.
When this box is not checked, no automatic
measurement in two faces.
☞
When using two face measure-
ments, then the angle right value
is averaged between both two face
measurements.
When this box is checked, a message informs
when the setup is finished.
Setup - TS
Advertisement
Table of Contents
