Table of Contents
Advertisement
Define
796
Description of the methods
Method
Description
Track
To stake the track geometry using a pole.
Track &
To stake the track geometry using a gauge device.
gauge
When a measurement is made, the values are retrieved from
device
the gauge device. The current track geometry is checked
against the theoretical track geometry. The current track
geometry includes both rail position, gauge and cant.
Rails &
Available for Check rail only.
gauge
This method does not take into account any rail design and
device
is not intended to check the absolute positioning of the rails.
However, the current position can be recorded.
Chainages are only used, if the gauge device provides them
from the odometer.
Next step
OK accesses the Define Task panel.
Key
Description
OK
To continue to the next panel.
Shifts
To apply horizontal and vertical shifts to the selected ele-
ment. Refer to "43.4 Working with Shifts".
Load
To load a task. Refer to "43.5 Tasks".
Save task
To save the settings as a task. Refer to "43.5 Tasks".
Fn Settings
To configure the app. Refer to "43.3 Configuring Roads
Apps".
Description of fields
Field
Option
Layer
Display only
or selectable
list
Chainage
Display only
line
Description
Layers contained in the active rail job can be
selected, for example layer of left or right
track design.
Shows the name of the chainage line, at the
selected layer.
Roads - Rail
Advertisement
Table of Contents
