Table of Contents
Advertisement
Segment Info - Start
Point/
Segment Info - End
Point,
Hz alignment page
Roads - General
Next step
Page to change to the 3D viewer page.
The 3D viewer page shows a 2D, 3D, cross section and long section view of
the design data at the selected chainage.
Segment to access Segment Info - Start Point/Segment Info - End Point.
If a value is unavailable in the design data, the field is shown as -----.
Key
Description
OK
To return to the previous panel.
Segment -
To move to the previous segment.
Segment +
To move to the next segment.
End point or
To change between the start point and the end point of the
Start point
segment.
Page
To change to another page on this panel.
Description of fields
Field
Option
Line name
Display only
Chainage
Display only
Easting,
Display only
Northing
and
Height
Hz tangent
Display only
Hz radius
Display only
Hz type
Display only
Next step
Page to change to the Vertical alignment page.
Description
The name of the selected line.
The chainage of start/end point of the seg-
ment.
The East/North coordinate and height of the
start/end point of the segment.
The tangent direction at the start/end point
of the segment.
The radius at the start/end point of the seg-
ment.
The current segment type.
627
Advertisement
Table of Contents
