Leica Captivate Technical Reference Manual page 722

44.6
44.6.1
Description
722
Field Option
Use partial Check box
spiral
For Element type at PI: Spiral - curve and Element type at PI: Curve - spi-
ral
Field Option
Method
Radius &
lengths
Radius &
parameters
Radius Editable field
Length in Editable field
Parameter Editable field
in
For Element type at PI: Spiral spiral and Element type at PI: Spiral - curve
- spiral
Field Option
Method
Radius &
lengths
Radius &
parameters
Radius Editable field
Length in Editable field
and
Length out
Parameter Editable field
in and
Parameter
out
Next step
OK to access the next panel.
Edit Vertical Alignments Using Elements
Overview
Allows creating, editing and deleting of the following elements:
Description
To create a partial clothoid. Available for Spi-
ral type: Clothoid and Spiral type: Cubic
parabola.
Description
Available for Spiral type: Clothoid.
Using the radius of the clothoid and its
length.
Using the radius of the clothoid and its
parameters.
The radius of the curve.
The lengths of the connecting curve.
Depending on the setting, the parameters P
or factors K of the clothoid. Available for Spi-
ral type: Clothoid with Method: Radius &
parameters.
Description
Available for Spiral type: Clothoid.
Using the radius of the clothoid and its
length.
Using the radius of the clothoid and its
parameters.
The radius of the curve.
The lengths of the connecting curve.
Depending on the setting, the parameters P
or factors K of the clothoid. Available for Spi-
ral type: Clothoid with Method: Radius &
parameters.
Roads - Alignment Editor