Table of Contents
Advertisement
45.4.8
Availability
Description
Additional Layer Info
Roads - Road
Description of fields
Field
Option
Number of
Display only
new points
Chainage
Display only
increment
Chainage
Display only
Horizontal
No, To left,
offsets
To right or
applied
Both
Vertical off-
No,Up,
sets applied
Down
Next step
Page changes to the 3D Viewer page.
Additional Layer Info
This menu function is available for all stake/check methods except layer.
This function allows additional road data to be obtained during a check or
stake survey of a road element.
Road elements include centrelines, kerb and gutters and slopes.
The map shows cross section view only and allows setting the vertical exagger-
ation.
Tap on the relevant element for selection. The information displayed shows the
current slope ratio and the height difference of the element. Also displayed are
the offset and height differences from the left and right vertices of the ele-
ment.
Description
Number of points being calculated.
☞
If Apply on both sides was
checked in Define Line Segmen-
tation, the number of calculated
points is twice the value entered in
Define Line Segmentation.
Available for Calculate segment from:
Chainage increment and Calculate seg-
ment from: Number of points.
The constant distance between the points.
Available for Calculate segment from: Cre-
ate single point.
The position of the new point along the line.
Indicates if and to which side a horizontal
offset was applied.
Indicates if and to which side a vertical offset
was applied.
775
Advertisement
Table of Contents
