Leica Captivate Technical Reference Manual page 832

Key
OK
New
Edit
Delete
Scan
Description of metadata
Metadata
-
Scan
Interval
Next step
New to access New Scan Segment.
New Scan Segment
This panel allows the definition of one or multiple segments of the scan profile
as opposed to scanning the whole profile.
☞
832
Description
To continue to Scan Profile after defining the scan seg-
ments.
To create a scan segment.
To edit a defined scan segment.
To delete a defined scan segment.
To set the metadata for Scan to Yes or No for the highligh-
ted segment.
Description
Name of the scan segment.
Status to scan or not scan a segment.
How often a point is measured around the profile.
When defining the scan segment, define the start and end angles in
the station profile. The vertical circle values are used not the horizon-
tal circle values so transit the telescope between face 1 and 2 as nee-
ded.
Roads - Tunnel