Table of Contents
Advertisement
Choose Pts by Pt ID
Range
506
Key
Description
Remove
To remove the highlighted point from the list. The point itself
is not deleted.
More
To display information about the codes if stored with any
point, the time and the date of when the point was stored
and the 3D coordinate quality and the class.
Fn Remove
To remove all points from the list. The points themselves are
all
not deleted.
Fn Range
To define a range of points from the job to be added to the
list.
Next step
For Method:Manually entered:
OK accesses Computed Parameters. Refer to "38.8.2 Manually Entered".
For Method:Matching points:
OK accesses Match Common Pts (%d). Refer to "38.8.3 Matching Points".
Key
Description
OK
To add the points within the selected range to the list in
Point Selection. Returns to the panel from where this panel
was accessed.
Next
To add the points within the selected range to the list in
Point Selection without quitting this panel. Another range
of point IDs can be selected.
Description of fields
Field
Option
From point
Editable field
ID and
To point ID
Description
Numeric point IDs in both fields:
•
Points with numeric point IDs falling
within the range are selected.
Example:
From point ID: 1, To point ID: 50
Selected are point IDs 1, 2, 3, 4, 5, 6, 7,
8, 9, 10.... 49, 50 as well as 001, 01,
0000045, ...
Not selected are point IDs
100,200,300, ...
COGO
Advertisement
Table of Contents
