Table of Contents
Advertisement
Import MX Genio
Data, for Road jobs
Job Menu - Import data
Description of fields
Field
Option
Linear unit
Selectable list
used within
file
Line prefix
Editable field
Next step
1.
OK leads back to Import Alignment Data.
2.
OK opens, depending on the selections made, a panel for the line,
layer or track selection.
Key
Description
OK
To start the import.
Centre
To set the highlighted line as centreline.
Use
To set Yes or No in the Use metadata for excluding/including
the highlighted line from/to import.
Line selection is also possible in 3D viewer.
☞
IF
a single line must be selected
multiple lines must be selected
the context menu must be activated
Description of metadata
Metadata
Description
-
Displays the name of all the lines in the layer.
Centreline
Shows Centreline for the line selected as centreline.
Use
For Yes: The selected line is used for the import.
For No: The selected line is not used for the import.
Next step
OK start the import.
Description
The units used in the file to import.
Available for Data type to import: DXF. The
prefix to be used.
THEN
tap on the line.
click the icons:
and
Drag the stylus on the panel in a
diagonal line to make a rectangular
area.
hold down the supplied stylus any-
where on the map for 0.5 second.
Refer to "35.6 Context Menu".
☞
To deselect all objects for
import, select Clear selec-
tion.
129
Advertisement
Table of Contents
