Table of Contents
Advertisement
45.4.10
Availability
Description
Graphic
Slope Definition
778
11.
Select Box / base definition.
Press OK to continue to the next panel.
12.
The next point of the box to stake out can now be defined.
To change back to the original chainage and offset defined for the
base point definition use Clear.
13.
Start with step 1. to define a new box/base.
Get current slope
This menu function is available for the stake/check of slopes, local manual
slopes and manual slopes.
To access Slope Definition. The slope ratio Current slope ratio of the last
measured position is used as the defined Cut slope/Fill slope. All other val-
ues in Slope Definition are filled in with the last measured position. The
defined manual slope is used for all points to stake out or check.
☞
The manual slope is active until it is turned off with Reset slope to
design from the toolbox.
Slopes are defined relative to the centreline.
d
a
e
b
Road_038
Key
Description
OK
To accept changes and move to the next panel depending on
the settings for slope staking.
Description of fields
Field
Option
Hinge line
Display only
a
Centreline
f
b
Hinge point
c
New slope
d
Defined hinge offset Offset
e
Defined hinge height differ-
ence Height difference
c
f
Cut slope/Fill slope
Description
The line the slope is defined relative to.
Roads - Road
Advertisement
Table of Contents
