Table of Contents
Advertisement
Key
Distance
Ch -
Ch +
Page
Fn Settings
Fn Position
Fn Tools
Description of fields
Field
☞
Point ID
Antenna
height
Target
height
☞
Stake chain-
age
756
Description
For TS:
To store angles and distance. Distance must be measured
before.
For TS:
To measure a distance.
Available for Stake road. To decrease the chainage as
defined by Chainage increment.
Available for Stake road. To increase the chainage as
defined by Chainage increment.
To change to another page on this panel.
To configure the app. Refer to "43.3 Configuring Roads
Apps".
For TS:
To position the TS to the defined stakeout point, including
defined offsets. The settings for Automatically aim instru-
ment to point being staked in Road Settings, TS specific
page, apply. Refer to " Road Settings,TS specific page".
To access the method-specific toolbox. Refer to "45.4 The
Toolbox".
Option
The following fields are always shown in all Stake and Check meth-
ods.
Editable field
Editable field
Editable field
The following fields are always shown in all Stake methods, except
for method Layer.
Editable field
Description
Name of the next point to be stored. The ID
is incremented/decremented whenever a
point gets stored.
For GS:
Height of the antenna.
For TS:
Height of the prism.
Nominal chainage of the point to be staked
out.
To get the information relative to the current
measured TS position or the current GS loca-
tion without leaving the app:
1
Tap into the Stake chainage field.
2 Use the Backspace button to
delete the whole content in the
field.
3 Press the ENTER button.
---- is displayed.
0014264_001
Roads - Road
Advertisement
Table of Contents
